While holding the Power button, press the button 5 times in succession. Release both buttons simultaneously.
Imagine the waste ink pad is a bathroom sponge. The printer’s counter is a timer that says, "This sponge can hold 1 liter of water." Once it hits 1 liter, the alarm rings. The resetter simply resets the timer to zero, telling you, "The sponge is empty." But if the sponge is already full, what happens when you flush more water (ink) into it? It overflows. resetter printer canon g2010
Disconnect the USB cable if desired, then turn the printer back on normally. While holding the Power button, press the button
Inside every Canon inkjet printer, there is a spongy area called the "waste ink absorber pad." During print head cleaning cycles, the printer flushes a small amount of ink into this pad to keep the nozzles clear. The printer tracks exactly how much ink has been flushed. Once this counter reaches a specific limit (usually around 5,000 to 8,000 pages), the printer assumes the pad is saturated and displays an error message like: The printer’s counter is a timer that says,
Press and hold the button, then press and hold the Power button.
When entering Service Mode, pressing the Stop button too many times can permanently lock your printer mainboard.