If ambient temperature is below 5°C (41°F), the charger automatically increases float voltage by 0.3V to compensate for cold conditions. No user action required.
To protect your vehicle's alternator, it is advisable to disconnect the battery from the vehicle or remove it entirely before charging. bradex bx60 battery charger manual full
Locate the toggle switches on the front panel of the Bradex BX60. If ambient temperature is below 5°C (41°F), the
The ammeter needle shows the amount of current being drawn. As the battery reaches full capacity, the needle will gradually drop toward . A full charge typically takes approximately 10 hours for a moderately depleted battery. 4. Disconnection Locate the toggle switches on the front panel
As the battery charges, the ammeter needle will gradually drop toward zero. When the needle is at or near "0," the battery is fully charged. Disconnection:
If the charger fails to operate, check the "flat" blade car-type fuse located on the base of the unit. Replace it only with a spare of the same rating.
Plug the charger into a standard wall outlet. The ammeter needle should move, indicating that current is flowing. 3. Monitoring the Charge